顺酐生产装置中，工艺过程使用的水都必须是钾、钠离子含量小于3ppm的脱盐水。每天都应定时检测粗顺酐储罐和工艺水储罐中的粗马来酐和工艺水中的钾、钠离子含量。
In maleic anhydride production unit, the water used in the process must be desalted water with potassium and sodium ion content less than 3ppm. The content of potassium and sodium ions in crude maleic anhydride storage tank and process water storage tank should be detected regularly every day.
如果在脱水精制过程中发现粗顺酐中的钾、钠离子含量超过5ppm或工艺水中钾、钠离子含量超过3ppm时，都应暂时停止该批精制系统操作，并立即向管理部门报告，在得到管理部门同意后并在主管技术和管理人员的监督下完成该批精制操作，然后立即对脱水精制系统进行清洗操作。
If the content of potassium and sodium ions in crude maleic anhydride exceeds 5ppm or the content of potassium and sodium ions in process water exceeds 3ppm, the operation of this batch of refining system shall be temporarily stopped and reported to the management department immediately. After obtaining the approval of the management department and under the supervision of the competent Technology and management personnel, the batch of refining operation shall be completed, and then the dehydration and refining system shall be immediately implemented Carry out cleaning operation.


如果工艺水储罐的工艺水中钾、钠离子超过3ppm，则应立即采取用合格的工艺水置换的方法，使工艺水储罐中的钾、钠离子含量合格。
If the potassium and sodium ions in the process water storage tank exceed 3ppm, the qualified process water shall be replaced immediately to make the potassium and sodium ion content in the process water storage tank qualified.
如果粗顺酐储罐的粗顺酐中钾、钠离子超3ppm，则应严格监视蒸馏釜内的温度进行蒸馏操作，完成本批精制作业后立即清洗系统。
If the potassium and sodium ions in the crude maleic anhydride storage tank exceed 3ppm, the temperature in the distillation kettle shall be strictly monitored for distillation operation, and the system shall be cleaned immediately after the completion of this batch of refining operation.