Basic steps of dissolving potassium bisulfate base modified tablets in water

过硫酸氢钾底改片溶于水中的过程，为了保证操作，应该按照严格的溶解步骤进行。那么，今天就来为大家介绍一下其在水中溶解的步骤。那么，具体是什么样的步骤呢？下面我们就来为大家介绍一下这个问题吧。

The dissolution process of potassium bisulfate base modified tablets in water should be carried out in strict dissolution steps in order to ensure operation safety. So, today, let's introduce the steps of its dissolution in water. So, what are the specific steps? Now let's introduce this problem to you.

1、过硫酸氢钾底改片往水里加，一边加一边拌和，避免部分过热，直到彻底溶解。

1. Add potassium bisulfate primer into water and mix it at the same time to avoid partial overheating until it is completely dissolved.

2、少数溶解时是不会溅出来的，在进行溶解时有必要是将参加水中，制止将水参中（这和浓硫酸稀释是一个道理）。其容器选用塑料原料的。

2. A few will not splash out during dissolution. When dissolving, it is necessary to join the water and prevent the water from being diluted with concentrated sulfuric acid. The container is made of plastic materials.

3、若是需求固定容量的话，水少一点，等溶解完后，冷却，再用水定容就好了。

3. If a fixed capacity is required, it is better to use less water. After dissolution, cool it and then use water to fix the volume.

过硫酸氢钾复合盐的储存：

Storage of potassium bisulfate complex salt:

过硫酸氢钾应该储存在阴凉通风的库房里。远离火和热。防止阳光直射，包装密封。应分别存放在氧化剂和碱液中，避免混合存放。储存区应配备适当的物料收集和渗漏。

Potassium bisulfate should be stored in a cool and ventilated warehouse. Keep away from fire and heat. Prevent direct sunlight and seal the package. They should be stored separately in oxidant and alkali liquor to avoid mixed storage. The storage area shall be equipped with appropriate material collection and leakage.

应急处理：隔离泄漏区域，限制进出口。应急人员戴防尘口罩、防酸套装。不要直接接触泄漏。小泄漏：避免灰尘，仔细清扫，收集在干燥，清洁，覆盖容器。大量渗漏：废物处置场的收集、回收或运输。

Emergency treatment: isolate the leakage area and restrict the import and export. It is recommended that emergency personnel wear dust masks and acid proof suits. Do not touch the leak directly. Small leakage: avoid dust, clean carefully, collect in dry, clean and cover the container. Massive leakage: collection, recycling or transportation of waste disposal site.